donoteatme/dsh-local-link

Name: donoteatme/dsh-local-link
Author: donoteatme

Plugin插件 Native原生 ⭐ 2 MIT Clients & Launchers客户端与启动器 Notifications & Remote通知与远程 Sessions & Context会话与上下文

Lightweight DeepSeek Harness plugin for paired LAN access: scan a QR code and continue the current DSH Web session from any phone, tablet, or computer.

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

dsh-local-link is a small native companion plugin built specifically for the DeepSeek Harness Web client at versions 0.1.5-rc.2 and 0.1.7-rc.2. It is installed into the Web profile via the dsh plugin --profile web add dsh-local-link command, after which dsh web starts a Harness instance with Local Link registered. The plugin extends the existing Harness slots, views, permissions, themes, and session state rather than replacing the chat surface, and it ships a bundle manifest plus an engines.dsh range that is matched against exact Harness releases rather than floating dist-tags.

Its single purpose is dependable same-LAN browser access to the running Harness Host: opening "Local access" on the desktop shows a short-lived QR code, a paired phone, tablet, or secondary computer scans it, and the paired browser lands directly on the desktop's currently selected Harness session with the same live conversation, permissions, workspaces, and plugin surfaces. For narrow touch screens the plugin reorganises the stock interface into responsive drawers, compact session controls, and touch-friendly actions, while keeping one client, one session, and one agent stream. Revocation blocks new requests, reconnects, and tears down every open Local Link WebSocket authenticated by the revoked device.

Development requires Git, Node.js 22.19+ or 24+, Corepack, and a global dsh install compatible with the declared range; the standard workflow is corepack pnpm install --frozen-lockfile, npm run typecheck, npm test, npm run build, and npm run verify. The gateway runs over plain HTTP and is explicitly limited to a trusted private network, with no public-internet exposure, hosted relay, or cloud account, and no automatic upload of diagnostics; English and Chinese dictionaries ship in src/locales/, and the project is released under the MIT licence by the dsh-local-link contributors.

dsh-local-link 是一个面向 DeepSeek Harness 0.1.5-rc.2 与 0.1.7-rc.2 的原生局域网插件，仅作用于 Web profile。它通过 dsh plugin --profile web add dsh-local-link 安装到 Harness，重启 dsh web 后即可在客户端中启用，扩展 Harness 现有的会话、权限、插件槽位与主题，而非替换聊天界面。

插件核心是同网段的一次性 QR 配对与 Mobile View 响应式适配。在桌面端打开 "Local access" 生成二维码，手机、平板或其他电脑扫码后，受邀浏览器直接进入桌面当前选定的 Harness 会话，沿用同一会话流、权限、主题与插件面板，并在窄屏触屏下重新组织成响应式抽屉、紧凑会话控件与触屏友好操作。

依赖方面需 Node.js 22.19+ 或 24+、Corepack 与兼容 engines.dsh 的全局 dsh，开发流程使用 corepack pnpm 与 npm run verify。网关走明文 HTTP，仅适用于受信私有网络，禁止暴露公网或用于公共 Wi-Fi；授权采用 MIT，但诊断数据从不自动上传。

View on GitHub在 GitHub 查看

Send to your DSH发给你的 DSH 安装

请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-local-link（donoteatme/dsh-local-link）
仓库：https://github.com/donoteatme/dsh-local-link
本站详情页：https://www.yhbd.top/plugins/donoteatme-dsh-local-link/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 2 · 最近提交 2026-10-02 · 主语言 TypeScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意

Only 2 stars - very few users, little community feedback星标只有 2，几乎没人在用，遇到问题缺少社区反馈

DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装

dsh plugin --profile web add dsh-local-link

把 donoteatme/dsh-local-link 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

19.0 KB · 缓存于 2026-10-02 22:12:59 · 19.0 KB

dsh-local-link

English | 中文 | Русский

Use the same DeepSeek Harness Web session from a phone, tablet, or another computer on your trusted private network. dsh-local-link adds one-time QR pairing and a responsive Mobile View to the stock DSH client—without a hosted relay, cloud account, native app, replacement chat UI, or second workspace picker.

Open Local access, scan the QR code, and the paired browser arrives at the desktop's currently selected Harness session with the same live conversation, permissions, workspaces, and plugin surfaces.

The 1.2.x line supports DeepSeek Harness 0.1.5-rc.2, 0.1.7-rc.2, and 0.2.0-rc.2 and keeps the stock Web client usable on narrow touch screens. It reorganizes the existing Harness interface into responsive drawers, compact session controls, and touch-friendly actions while keeping the same client, session, plugin slots, permissions, and live agent stream.

Security boundary: the gateway uses plain HTTP and is intended only for a trusted private network. Do not expose its port to the internet or use it on public Wi-Fi.

DeepSeek Harness with dsh-local-link open: one-time QR pairing to the current stock Harness session

_{One Harness session, paired directly across the trusted LAN.}

Features and scope

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 donoteatme/dsh-local-link 的 README.md。在 GitHub 查看原文 →