a903067276-rgb/dsh-plan-switch

Name: a903067276-rgb/dsh-plan-switch
Author: a903067276-rgb

Plugin插件 Native原生 ⭐ 6 MIT Prompts & Skills提示词与技能

DSH 网页输入栏的一键进入/退出 Plan 模式，/plan 的快捷点击快捷键

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is an unofficial community-maintained native plugin built exclusively for the DeepSeek Harness (DSH) web client. It adds a one-click toggle button for Plan mode to the left end of DSH’s input bar, creating a quick shortcut for the built-in /plan command that eliminates the need to manually type the command. It follows DSH’s official design tokens and automatically adapts to both dark and light system themes. To install, users can run the one-line official DSH plugin command, which requires pnpm to be available on the system PATH and DSH web version 0.1.0-rc.6 or newer.

The plugin is intended for any DSH web user who wants faster, more convenient access to Plan mode without having to type the slash command every time. During normal use, clicking the checklist icon button toggles Plan mode exactly the same way as running the /plan command manually. The button automatically hides itself when Plan mode is active, so there is no duplicate status indicator alongside the official plan card. While a /plan toggle is pending, the button is disabled to prevent accidental stray clicks that would reverse the switch. It also syncs state in real time from any entry point that changes Plan mode, including the official plan chip and mid-run agent switches.

The plugin runs entirely client-side, requires no extra host-side setup, and does not store any user data or write any files to your system. It has been fully tested only on macOS; Linux and Windows are expected to work because the plugin is pure frontend with no platform-specific dependencies, but they have not been verified. Compatibility is only guaranteed for the latest DSH releases, with best-effort support for older DSH versions. It is released under the open source MIT license, and users must restart dsh web after installing or updating the plugin for changes to take effect. A manual fallback install method is also available for edge cases.

这是一个专为 DeepSeek Harness（DSH）网页端开发的原生社区插件，核心功能是在 DSH 输入栏左侧添加一个一键切换计划模式的按钮，为官方 /plan 命令提供快捷点击入口，无需用户手动输入命令。插件使用官方 DSH 设计规范开发，会自动适配深色/浅色主题，由社区成员独立维护，是官方未提供的非官方扩展。安装可通过 DSH 官方插件命令一键完成，要求系统路径存在 pnpm，且 DSH 网页端版本不低于 0.1.0-rc.6。

该插件面向所有使用 DSH 网页端、希望更快捷调用计划模式的用户。日常使用中，用户只需点击输入栏左侧的对勾图标按钮，即可触发计划模式的切换，效果和手动输入 /plan 命令完全一致。插件会实时同步官方计划模式的状态：激活时按钮自动隐藏避免重复显示，切换中按钮会锁定防止误点击，从任何入口修改计划模式状态都能实时同步。

插件完全在客户端运行，不需要额外的主机端配置，也不会存储任何用户数据。目前仅在 macOS 平台经过完整测试，Linux 和 Windows 平台理论上可运行但尚未测试。兼容性仅保证适配最新版 DSH，旧版本 DSH 兼容仅做尽力尝试不做保证，项目采用 MIT 许可开源，安装或更新后需要重启 dsh web 才能生效，也支持手动挂载的回退方案。

View on GitHub在 GitHub 查看

Send to your DSH发给你的 DSH 安装

请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-plan-switch（a903067276-rgb/dsh-plan-switch）
仓库：https://github.com/a903067276-rgb/dsh-plan-switch
本站详情页：https://www.yhbd.top/plugins/a903067276-rgb-dsh-plan-switch/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 6 · 最近提交 2026-10-01 · 主语言 JavaScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意

Only 6 stars - very few users, little community feedback星标只有 6，几乎没人在用，遇到问题缺少社区反馈

DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装

dsh plugin --profile web add "github:a903067276-rgb/dsh-plan-switch#main"

把 a903067276-rgb/dsh-plan-switch 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

7.5 KB · 缓存于 2026-10-01 22:11:01 · 7.5 KB

dsh-plan-switch 📋

English | 简体中文

A one-click enter/exit Plan mode button for the DSH web input bar (a quick-click shortcut for /plan) — a plugin for DeepSeek Harness (dsh) web.

Unofficial project: independently developed and maintained by a community member, not an official DeepSeek product.

⚠️ DISCONTINUED (2026-10-01)

DSH 0.2 already ships Plan mode entry points: pick 「计划」in the composer's + Command menu, or type /plan; exit with the official 「计划」status badge in the composer. This plugin only saved you one click (plus pending-guard / auto-hide), so the official build leaves no capability gap — the author has uninstalled it and stopped maintaining it.

Last release: v0.4.1 (verified on DSH 0.2.0-rc.2). No further fixes or compatibility work.

It has been removed from the author's three profiles (desktop / web / sandbox). You may keep installing it, but compatibility going forward is at your own risk.

What to use instead: the /plan command, or 「计划」in the composer + menu; exit via the 「计划」badge in the composer.

Thanks to everyone who used it.

Screenshot

The checklist icon button at the left end of the input tool row (official DSH design tokens, follows dark/light theme).

Features

One-click enter/exit Plan mode: a checklist icon button at the left end of the input tool row; clicking it runs the official /plan toggle command.
Hides while Plan mode is active: the button hides itself and the official plan card takes over the status display — there is never a duplicated indicator.
Pending-switch guard: while a /plan toggle is queued, the button is disabled (the same "switching" semantics as the official plan chip), so a stray click can't reverse the switch.
Live state: the button follows the plan state through the official projection, so changes from any entry point (/plan command, official chip, agent switching mid-run) are reflected in real time.

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 a903067276-rgb/dsh-plan-switch 的 README.md。在 GitHub 查看原文 →