DSH Plugin HubDSH 插件市场
AcidGr/dsh-web-lan-access 预览 preview

AcidGr/dsh-web-lan-access

Plugin插件 Native原生 ⭐ 37 MIT Notifications & Remote通知与远程

DeepSeek 工具集 (dsh) Web 插件

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is a native plugin built exclusively for DeepSeek Harness (DSH) that enables LAN and remote access to the DSH Web UI. It fixes two critical issues that break the UI when accessing DSH over plain HTTP from a non-loopback IP address: it polyfills the missing crypto.randomUUID() Web API and enables host-backed settings for remote authenticated clients. You can install it easily by sending the repo URL to your DSH agent for automatic setup, or via the DSH CLI with a single command, or manually following the documented steps for offline use.

This plugin is intended for users who need to access their local DSH Web service from another device over a local network or remote VPN like Tailscale. After installation, you can start DSH Web as you normally would without adding an extra --host flag. The plugin automatically detects all non-internal IPv4 addresses on your host, configures the required trust rules automatically, so you can just navigate to the IP from your remote device to access your DSH instance without any additional manual configuration in most common cases.

This plugin is released under the open source MIT license and works on all major platforms including Linux, macOS, Windows, and Android. There is an important security note to keep in mind: binding to 0.0.0.0 exposes your DSH authentication surface to every reachable network interface. You should only use this plugin on trusted networks, restrict access with a firewall or Tailscale, and rolling back the plugin is simple. You can remove it with a single DSH CLI command if you no longer need the remote access functionality it provides, and all changes are fully reversible.

这是一个专为 DeepSeek Harness（DSH）开发的原生插件，核心功能是解决 DSH Web UI 在非本地回环地址（如局域网 IP、Tailscale IP）通过 HTTP 访问时的渲染失败问题，修复非回环地址下模型和设置页面不可用的 Bug。它通过 DSH 官方提供的扩展点注入引导脚本，实现 UUID 填充和主机权限配置，整个过程无需修改 DSH 源码，完全可逆。

适合需要从另一台设备通过局域网或 Tailscale 等远程访问本地 DSH Web 服务的用户使用。安装完成后只需正常启动 DSH Web 服务，无需额外添加 --host 参数，插件会自动探测当前主机的所有非内部 IPv4 地址，自动配置信任规则，开箱即可通过对应 IP 访问远程 DSH 服务。

插件遵循 MIT 开源许可协议，全平台兼容（支持 Linux、macOS、Windows、Android），使用时需要注意，绑定 0.0.0.0 会暴露 DSH 认证入口到所有可访问接口，建议仅在受信任网络使用，或通过防火墙、Tailscale 限制访问，回滚非常简单，可通过 DSH CLI 一键移除。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-web-lan-access（AcidGr/dsh-web-lan-access）
仓库：https://github.com/AcidGr/dsh-web-lan-access
本站详情页：https://www.yhbd.top/plugins/acidgr-dsh-web-lan-access/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 37 · 最近提交 2026-09-23 · 主语言 JavaScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 note1 项提示
  • 37 stars - an early-stage project星标 37，属于早期项目
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add dsh-web-lan-access

把 AcidGr/dsh-web-lan-access 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

7.4 KB · 缓存于 2026-09-10 19:39:58 · 7.4 KB

dsh-web-lan-access

awesome · DSH plugin

English | 简体中文

LAN / remote access support for the DeepSeek Harness Web UI.

The problem

The Web UI calls crypto.randomUUID() in boot-critical paths (RPC id minting, message ids, draft attachments). That Web API exists only in secure contexts (HTTPS, or http://localhost / http://127.0.0.1). When the UI is served over plain HTTP from a non-loopback address — a LAN IP, a Tailscale IP, or a hostname — crypto.randomUUID is undefined, every RPC throws, and sessions and models never render.

Current DSH clients also select Host-backed settings from the browser hostname: a non-loopback page is assigned memory-only settings even after browser authentication succeeds. The Models and plugin settings pages therefore remain unavailable on an otherwise working trusted-host deployment.

The fix

A host-side plugin that uses the webserver's official index-tap extension point (webServer.tapIndex) to inject a small bootstrap as the first script in <head>, before the boot manifest and shell entry. The bootstrap:

  • supplies an ordinary HTTP transport carrying DSH's ownsHost deployment signal, enabling authenticated Host settings from the trusted remote page;
  • polyfills crypto.randomUUID with an RFC 4122 v4 implementation built on crypto.getRandomValues, which is available on insecure origins.

The bootstrap leaves a transport supplied by another shell untouched, and the UUID polyfill is a no-op on secure origins.

  • No product source modified; fully reversible
  • Uses DSH's existing index-tap and client-transport extension points
  • Platform-independent (Linux / macOS / Windows / Android)

Install

Method 1: Ask your DSH Agent (Easiest 🤖)

Send this repo URL directly to your DSH chat with the instruction:

"Install this plugin for me: https://github.com/AcidGr/dsh-web-lan-access"

Your DSH Agent will automatically install the package and configure it in the background.

Method 2: Bundle install via CLI (Recommended)

Installed from npm:

dsh plugin --profile web add dsh-web-lan-access

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 AcidGr/dsh-web-lan-access 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev mnemosyne 下一个 Next dsh-usage-plugin →