DSH Plugin HubDSH 插件市场
euuuuuuzer/dsh-loop-dock 预览 preview

euuuuuuzer/dsh-loop-dock

Plugin插件 Native原生 ⭐ 6 MIT Subagents & Orchestration子代理与编排Models & Routing模型与路由

DeepSeek Harness的循环停靠：一个harness，多个代理循环。

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

dsh-loop-dock is a community-built native plugin designed exclusively for DeepSeek Harness (DSH). It acts as a central hub that enables multiple agent loop providers to run within a single DSH instance, letting each individual agent select which loop will execute its tasks. The plugin does not create a new agent loop from scratch; instead, it provides core infrastructure for loop registration, loop selection, agent-loop binding, and driver delegation, letting the community build custom loops that integrate seamlessly with DSH. To install the plugin, you first need to have DSH version 0.1.0-rc.6 and pnpm installed on your system, then download the latest release tarball from GitHub and install it via the DSH plugin command line interface.

Before dsh-loop-dock, DSH only supported a single loop slot that all agents had to share, regardless of their task or underlying model. A model’s performance is not determined by the model alone; the same model can behave very differently with different turn structures, tool discipline, context management, and planning strategies. This plugin unlocks the ability to pair each agent with a loop that is tailored to its specific task and model, creating a more flexible and effective workflow. A common setup would pair a coding agent with a coding-specific loop, a research agent with a research loop, and a planning agent with a planning-specific loop, all running in the same DSH instance.

dsh-loop-dock is currently in pre-alpha status, but it is fully runnable, with core features like loop registry, agent-loop routing, durable binding, and driver selection all working as intended. You can test the plugin without an API key or network connection by switching to the bundled fake-driver in DSH settings, creating a new session, and sending any message to get a local test reply. It is released under the open-source MIT license, is a community-led project not affiliated with official DeepSeek, and its core routing code has no runtime dependencies, targeting DSH version 0.1.0-rc.6.

dsh-loop-dock 是专为 DeepSeek Harness (DSH) 开发的原生社区插件，作用是提供一个多代理循环调度枢纽，允许不同的代理循环提供者接入同一个DSH实例，让每个代理可以自主选择运行自身的循环框架。它本身不设计新的代理循环，只负责循环注册、选择、绑定和调度委托，让社区开发的不同循环可以在同一个DSH实例中协同工作。安装需要预先部署 DSH 0.1.0-rc.6 版本和 pnpm 包管理器，下载发布包后通过 dsh 插件命令完成安装。

这个插件解决了DSH原本单循环插槽的限制，原本所有代理都只能共用同一个执行循环，而dsh-loop-dock 允许每个代理匹配适合自身任务和模型的专用循环。不同的循环结构会给同一个模型带来完全不同的行为表现，从轮次结构、工具调用规则到上下文管理、规划策略都可以差异化定制。典型使用场景是为不同任务的代理分别配置对应模型和专用循环，比如编码代理用编码循环，研究代理用研究循环，规划代理用规划循环。

该插件当前处于预alpha版本，但已经可运行，支持循环注册、代理-循环路由、持久化绑定、驱动选择等核心功能。用户可以先通过内置的fake-driver测试功能，无需API密钥或网络连接即可验证插件运行是否正常。它采用MIT许可证开源，是社区维护的非官方项目，核心路由代码无运行时依赖，适配DSH 0.1.0-rc.6版本的接口规范。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-loop-dock（euuuuuuzer/dsh-loop-dock）
仓库：https://github.com/euuuuuuzer/dsh-loop-dock
本站详情页：https://www.yhbd.top/plugins/euuuuuuzer-dsh-loop-dock/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 6 · 最近提交 2026-08-16 · 主语言 JavaScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意
  • Only 6 stars - very few users, little community feedback星标只有 6，几乎没人在用，遇到问题缺少社区反馈
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add github:euuuuuuzer/dsh-loop-dock

把 euuuuuuzer/dsh-loop-dock 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

19.2 KB · 缓存于 2026-08-23 03:41:35 · 19.2 KB

dsh-loop-dock

One harness. Multiple agent loops.

CI GitHub release License: MIT Node >=22.19

dsh-loop-dock is a community infrastructure plugin for DeepSeek Harness (DSH). It does not design a new agent loop. It provides the dock that lets many loop providers exist in one harness and lets each agent choose which one runs it.

中文说明

Quick Start

  1. Install DeepSeek Harness 0.1.0-rc.6 and pnpm.

  2. Download dsh-loop-dock-0.1.0.tgz from the latest GitHub Release.

  3. Install it into a clean web profile:

    dsh plugin --profile web add ./dsh-loop-dock-0.1.0.tgz
dsh web

  4. Open Settings → General → Default driver and choose fake-driver.

  5. Create a new session and send any message. The reply is local:

    [FAKE-DRIVER] fake driver reply — generated locally, no model call.

No API key or network is needed for this first check.

Why dsh-loop-dock?

A model's ceiling is not the model alone. The same model can behave very differently depending on turn structure, tool discipline, context management, planning strategy, and execution workflow.

Community plugins have already shown this: small changes around one loop — a minimal-first preset, a prompt section, a bootstrap hook — can give the same model meaningfully different behavior.

DSH already made the Agent Loop a plugin, but the slot is still effectively single:

Agent A ─┐
Agent B ─┼──> Loop X
Agent C ─┘

dsh-loop-dock opens the next step:

Agent A ──> Loop X
Agent B ──> Loop Y
Agent C ──> Loop Z

One harness. Multiple specialized loops.

What does the dock do?

The dock is intentionally simple. It does not decide how a loop reasons.

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 euuuuuuzer/dsh-loop-dock 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev dsh-compressor 下一个 Next dsh-atomgit →