StyxNether/dsh-auto-approval-plugin

Name: StyxNether/dsh-auto-approval-plugin
Author: StyxNether

Plugin插件 Native原生 ⭐ 3 MIT Approval & Security审批与安全

Trusted Auto：DeepSeek Harness 的中间权限层级，介于工作区写入与完全危险访问之间，自动批准无害命令及可信区域目标。

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is a native permission plugin built exclusively for DeepSeek Harness (DSH). It adds a new middle permission tier called Auto Approval between DSH’s existing Workspace Write and Full Access tiers. It automatically approves harmless commands and operations that target locations within user-configured trusted areas, which can even be outside the current open workspace. It registers a listener that runs before DSH’s default web approval prompt to make its access decision. All other requests are passed through to the user for manual approval, and you install it directly via DSH’s built-in plugin management system.

After installation completes, the new Auto Approval preset shows up in two places: DSH’s general permission settings page, and the /permission command picker. You can set it as the default permission tier for all future sessions, or switch your current active session to use it immediately. If you disable the plugin, the tier still stays visible in both interfaces, but it behaves exactly like the Workspace Write tier with no automatic approvals at all. This plugin is designed for DSH users who want to reduce manual approval prompts without granting full unrestricted access to their system.

This plugin is released under the open source MIT license. Its decision core is plain dependency-free JavaScript, and the plugin wrapper is a standard Cordis plugin that follows DSH’s extension conventions. It is not designed to be a full security boundary, and DSH’s sandbox still enforces all existing restrictions on non-escalated calls. Every automatic approval is logged in the session audit log for later review, and any errors in the decision process fall back safely to manual approval. Uninstalling the plugin leaves no residual configuration or changes to your DSH setup.

这是一个专为 DeepSeek Harness (DSH) 开发的原生权限插件，在 DSH 现有的「工作区写入」和「完全访问」两个权限等级之间，新增了一个名为「自动审批」的中间权限层级。它会自动审批符合规则的无害操作，以及目标位于用户配置的可信区域（可超出当前工作区）内的请求，其余操作仍然保留人工审批环节，必须通过 DSH 的插件管理机制安装使用。

安装完成后，新的「自动审批」权限预设会同时出现在 DSH 的通用设置权限页面和 /permission 命令选择器中，用户既可以将其设为未来会话的默认权限等级，也可以随时为当前运行的会话快速切换该权限。如果禁用插件，该权限等级仍会显示，但所有操作都不会自动审批，行为和「工作区写入」完全一致。该插件适合希望在不开放完整最高权限的前提下，减少人工审批次数、提升 DSH 操作流畅度的用户使用。

该插件采用 MIT 许可证开源，决策核心是无依赖的纯 JavaScript，插件层是标准 Cordis 插件，符合 DSH 插件开发规范。它本身不是安全边界，仅自动审批窄范围的可验证请求，DSH 沙箱仍然会限制所有未升级的调用。所有自动审批操作都会记录在会话日志中便于审计，出错时会自动委托给人工审批，不会阻塞会话，卸载后也不会残留多余配置。

View on GitHub在 GitHub 查看

Send to your DSH发给你的 DSH 安装

请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-auto-approval-plugin（StyxNether/dsh-auto-approval-plugin）
仓库：https://github.com/StyxNether/dsh-auto-approval-plugin
本站详情页：https://www.yhbd.top/plugins/styxnether-dsh-auto-approval-plugin/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 3 · 最近提交 2026-09-06 · 主语言 JavaScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意

Only 3 stars - very few users, little community feedback星标只有 3，几乎没人在用，遇到问题缺少社区反馈

DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装

dsh plugin --profile web add dsh-auto-approval-plugin

把 StyxNether/dsh-auto-approval-plugin 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

18.5 KB · 缓存于 2026-09-06 19:41:21 · 18.5 KB

dsh-auto-approval-plugin

🌐 Language: English | 简体中文

A middle permission tier for DeepSeek Harness, between Workspace Write and Full access (danger-full-access): it adds a auto-approval preset to the permission settings and backs it with an automated approval answerer that approves harmless commands and operations whose target lies inside configured trusted areas — including areas outside the current workspace — and asks the user for everything else.

⚠️ Scope control, not a security boundary. This plugin automates the human approval step for a narrow, verifiable class of requests. The DSH sandbox still confines every non-escalated call; an auto-approved call runs with the wider mode for exactly that one call (the same one-shot grant a human click would produce). Do not use it on machines or sessions you would not trust a human operator to run commands on.

What it does

	Workspace Write	Auto Approval (this plugin)	Full access
Sandbox mode	`workspace-write`	`workspace-write`	`danger-full-access`
Approval policy	`ask`	`ask`	`never`
Writes inside workspace / temp	allowed	allowed	allowed
Harmless commands (see rule table)	ask	auto-approved	never asks
Targets inside trusted areas	ask	auto-approved	never asks
Everything else	ask	ask	never asks

After installing, the new preset appears in both permission surfaces:

General settings → Permission — sets auto-approval as the default for future sessions;
/permission picker — switches the current session immediately (/permission auto-approval).

While the plugin is disabled (mode: off), picking the Auto Approval tier behaves exactly like Workspace Write — the tier stays visible in both surfaces, but nothing is auto-approved.

How it works

DSH routes every operation that needs approval through the approval/request waterfall (official docs: approval seam / Chinese). This plugin registers a listener with prepend, so it runs before the web approval prompt:

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 StyxNether/dsh-auto-approval-plugin 的 README.md。在 GitHub 查看原文 →