DSH Plugin HubDSH 插件市场

Victor-770/dsh-commandcode-provider

Plugin插件 Native原生 ⭐ 9 MIT Models & Routing模型与路由Notifications & Remote通知与远程

Command Code的dsh LLM提供方插件——所有计划（包括Go）均通过/alpha/generate使用您的Studio API密钥。

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is a custom LLM provider plugin built exclusively for DeepSeek Harness (DSH). It connects DSH to the Command Code LLM service, and is a port of the existing pi-commandcode-provider to DSH’s native LLM integration layer. Unlike other provider plugins, it works with every Command Code pricing plan, including the $1/month Go plan that does not offer Provider API access. To install, you can run a single one-line command in your terminal, and the plugin will automatically mount itself to your active DSH profile without manual config edits. The package includes a pre-configured DSH bundle manifest that handles automatic registration.

After installation, you need to restart DSH for the provider to show up in the web UI. Next, you generate an API key from the Command Code Studio under the API Keys sidebar section, then add it to DSH either via the /commandcode-setkey chat command or through the web UI settings page. Once configured, you can select any Command Code model from DSH’s model picker and start chatting immediately. This plugin is intended for DSH users who prefer to use Command Code’s model lineup over the default DeepSeek models. It also supports additional optional configuration for advanced users who want to customize endpoints or cache behavior.

This is an unofficial community-maintained integration, and it is not affiliated with, endorsed by, or supported by Command Code. All users must have their own Command Code account, and Command Code’s terms of service, pricing, and availability policies apply to all usage of the service through this plugin. The project is released under the permissive MIT open source license. For development, contributors need to install npm dependencies, and can use built-in npm scripts for type checking, building, and running the test suite. Published production builds do not require extra dependencies, as all required peer dependencies are provided by the DSH host.

dsh-commandcode-provider 是专为 DeepSeek Harness (DSH) 开发的原生插件，作用是将 DSH 连接到 Command Code 大模型服务，是 pi-commandcode-provider 针对 DSH 的 LLM 接口层移植版本。它支持所有 Command Code 套餐，包括每月 1 美元的基础 Go 套餐，因为插件使用 Command Code 的 /alpha/generate 端点而非传统 Provider API 协议，只需要用户从 Command Code Studio 获取 API 密钥即可使用。

安装方式对新手友好，仅需一条 dsh 插件安装命令即可完成安装，插件自带 DSH 捆绑清单和 cordis 配置，会自动挂载到用户当前配置文件的提供者列表中，不需要用户手动修改配置文件。安装完成后重启 DSH，就能在网页 UI 的模型选择器中看到 Command Code 模型，适合想要在 DSH 中使用 Command Code 大模型的开发者。

该插件是社区维护的非官方集成，未获得 Command Code 官方授权，用户需要自行注册 Command Code 账号并遵守其条款、定价和可用性规则。项目采用 MIT 许可证开源，开发阶段需要安装 npm 依赖，可通过 npm 脚本完成类型检查、构建和测试，发布版不需要额外依赖，依赖由 DSH 宿主提供。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-commandcode-provider（Victor-770/dsh-commandcode-provider）
仓库：https://github.com/Victor-770/dsh-commandcode-provider
本站详情页：https://www.yhbd.top/plugins/victor-770-dsh-commandcode-provider/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 9 · 最近提交 2026-08-15 · 主语言 TypeScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意
  • Only 9 stars - very few users, little community feedback星标只有 9，几乎没人在用，遇到问题缺少社区反馈
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add dsh-commandcode-provider@0.1.3

把 Victor-770/dsh-commandcode-provider 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

7.5 KB · 缓存于 2026-08-23 03:42:05 · 7.5 KB

dsh-commandcode-provider

Languages: English | 中文

A custom LLM provider plugin for DeepSeek Harness (dsh) that connects dsh to Command Code — a faithful port of pi-commandcode-provider onto dsh's LLM seam.

Works with every Command Code plan, including the $1/month Go plan. Even the Go plan — the only one without Provider API access — gives you an API key in the Studio; that key authenticates the CLI/agent login. This plugin uses that same key against Command Code's own /alpha/generate endpoint, not the traditional Provider API protocol, so it works even when a plan has no Provider API access.

Disclaimer: This is an unofficial, community-maintained integration. It is not affiliated with, endorsed by, or supported by Command Code. You need your own Command Code account. Command Code's terms, availability, and pricing apply.

Quick Start

Newbie-friendly: one command to install — the plugin mounts itself, no config files to edit.

1. Install

dsh plugin --profile web add dsh-commandcode-provider@0.1.3

The package declares dsh.bundle, so dsh plugin add installs it AND automatically joins it to the profile's bundle layers — the shipped cordis.patch.yml mounts the provider row for you.

Do not also add a manual cordis.patch.yml row for this plugin — the bundle patch already mounts it; a second row would double-register the provider.

2. Restart dsh

The provider then appears in the web UI automatically.

3. Get your API key

Even on the Go plan, Command Code gives you an API key used for authentication:

  1. Open commandcode.ai and sign in.
  2. Go to Studio → API Keys (in the sidebar).
  3. Click Generate API key and copy it.

This key is an authentication key for using Command Code — it is not a "Provider API" key. The plugin speaks Command Code's own /alpha/generate protocol with it, so no Provider API access is required, and the Go plan works.

4. Configure the API key (either way)

** Command:** In a dsh chat, run:

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 Victor-770/dsh-commandcode-provider 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev dsh-Plugin--ChineseChess 下一个 Next dsh-xiaotangyuan-game →