GodD6366/dsh-sub2api

Name: GodD6366/dsh-sub2api
Author: GodD6366

Plugin插件 Native原生 ⭐ 2 MIT Models & Routing模型与路由 Notifications & Remote通知与远程

将你的sub2api网关连接到DeepSeek Harness：通过一个基础URL实现OpenAI兼容的多提供商路由（OpenAI / Claude / Grok / Gemini），支持按密钥的模型发现、用量查询和设置页面。

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

dsh-sub2api is a DSH plugin that connects a sub2api gateway as OpenAI, Claude, Grok, and Gemini model providers. It supports streaming, tool calls, model discovery, usage lookup, reasoning effort, global image tools, and Auto Vision wrappers. Use it when subscription quota should be exposed through Harness as OpenAI-compatible routes. Keys are group-specific, and it relies on the pi-ai adapter; read-only installs require running the patch script manually.

dsh-sub2api 是 DSH 插件，把 sub2api 网关接入为 OpenAI、Claude、Grok、Gemini 四条模型路由，支持流式、工具调用、模型拉取、用量查询、推理强度与自动识图。需要把订阅额度网关统一接入 Harness 时使用；注意密钥按平台分组配置，且依赖 pi-ai 适配器，只读安装需手动运行补丁脚本。

View on GitHub在 GitHub 查看

Send to your DSH发给你的 DSH 安装

请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-sub2api（GodD6366/dsh-sub2api）
仓库：https://github.com/GodD6366/dsh-sub2api
本站详情页：https://www.yhbd.top/plugins/godd6366-dsh-sub2api/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 2 · 最近提交 2026-09-08 · 主语言 TypeScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意

Only 2 stars - very few users, little community feedback星标只有 2，几乎没人在用，遇到问题缺少社区反馈

DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装

dsh plugin --profile web add @godd6366/dsh-sub2api

把 GodD6366/dsh-sub2api 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

7.8 KB · 缓存于 2026-09-09 19:45:20 · 7.8 KB

dsh-sub2api

中文文档

Connect your sub2api gateway to DeepSeek Harness as model providers.

Sub2API is an AI API gateway that turns subscription quota into OpenAI-compatible endpoints. In its model, each API key is bound to a group, and the group decides the platform (OpenAI / Claude / Grok) and the models that key can serve. The three provider routes (sub2api-openai, sub2api-claude, sub2api-grok) are served by the harness's own pi-ai adapter (dsh-llm-pi-ai): this plugin translates its llm-sub2api: settings into llm-pi-ai: provider profiles (all sharing one bare-host base URL, no /v1), and protocol serialization, streaming, and usage accounting all live in pi-ai. The same gateway serves OpenAI, Claude, and Grok models side by side, and the harness routes each request to the key whose group owns the requested model.

Features

Image generation: select a generation model in settings. generate_image saves images to the workspace and returns an inline attachment. The separate image-analysis tool and its model selector have been removed.
One base URL, three provider routes: sub2api-openai, sub2api-claude, sub2api-grok — each configured with its own key and at least one model, registered as a live LLM provider as soon as both are set.
Streaming chat (backed by pi-ai): SSE streaming, tool calls, reasoning deltas, and token usage are mapped to the harness protocol by dsh-llm-pi-ai, which natively handles wire-format details like top-level function_call items in the Responses API.
Model discovery: one-click "fetch models" calls GET {baseURL}/v1/models with the key, so each route's catalog matches exactly what the sub2api group serves.
Reasoning effort (thinking mode): reasoning_effort is passed straight through to the gateway and adjustable right in the chat model selector; the settings page's per-model "reasoning strength" field fills each model's real levels from models.dev reasoning_options (e.g. gpt-5.6-sol → none/low/medium/high/xhigh/max, deepseek-v4-flash → low/high/max), editable in the settings page; reasoningEfforts: [] opts a model out.
Usage lookup: "view usage" calls GET {baseURL}/v1/usage and summarizes quota, balance, rate limits, and subscription windows.
Standards-based config: base URL and model catalogs live in the llm-sub2api: settings section ($DSH_HOME/settings.yaml, written by the web Models page); keys go through the harness credential store.
Provider icons from lobehub/lobe-icons, embedded as SVG in the settings page.

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 GodD6366/dsh-sub2api 的 README.md。在 GitHub 查看原文 →