DSH Plugin HubDSH 插件市场
jyao-SUSE-power-group/dsh-provider-rate-limit 预览 preview

jyao-SUSE-power-group/dsh-provider-rate-limit

Plugin插件 Native原生 ⭐ 4 MIT Models & Routing模型与路由

dsh-provider-rate-limit

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is a native DeepSeek Harness plugin that adds per-provider, per-model rate limiting to LLM traffic. It also supports gateway identity rules for client spoofing on restricted free-tier LLM gateways, including a pre-built one-click preset for OpenCode Zen. You can install it via the DSH plugin manager by running dsh plugin --profile web add github:jyao-SUSE-power-group/dsh-provider-rate-limit, then restart DeepSeek Harness to activate it. It registers itself with the DSH llm service automatically after installation, so you don’t need any extra setup. Manual installation is also supported by cloning the repo to your local DSH plugins folder and running pnpm install --prod.

It implements a token-bucket rate limiter with smooth refill, burst support and idle-time recovery. When the bucket is empty, you can choose between two modes: wait mode that queues requests for up to your configured maximum wait time, or reject mode that immediately returns a synthetic RATE_LIMIT response. It guarantees strict FIFO ordering via a reservation-based design that does not require polling. All configuration options are available via the DSH settings UI, and all changes hot-reload without needing a restart.

It includes a real-time live stats line in the composer dock under the chat input, with SSE-pushed updates that do not require polling. Hovering over the stats line shows a per-route breakdown of provider and model request counts. It also exposes an SSE events endpoint, a JSON stats HTTP API, and a cross-plugin stats service that other DSH plugins can consume to access rate limit data. The entire project is open source under the MIT license, so you can modify it freely to fit your own needs.

这是一个专为DeepSeek Harness开发的原生限流插件，用于对不同供应商、不同模型的LLM请求做粒度限流。它采用带空闲恢复的令牌桶算法，支持突发请求，桶空时支持两种处理模式：排队等待至最大超时放行，或直接拒绝并返回限流响应。同时还支持为受限免费网关做客户端身份伪装，预置一键配置的OpenCode Zen规则。

插件支持严格的FIFO排队规则，通过预留设计保证请求按顺序处理无需轮询。提供全局总开关，关闭时可直接放行所有流量无需重新注册监听器。配置界面支持中英双语，所有配置项都支持热重载，无需重启DSH就能生效。还在聊天输入框下方的停靠栏提供实时统计行，悬浮可查看各路由的详细统计数据。

插件提供SSE推送端点和JSON格式的统计HTTP API，支持其他插件调用跨插件统计服务获取限流数据，也可开放给外部工具使用。路由匹配采用O(1)查找，用预构建Map替代线性扫描提升匹配性能。可通过DSH官方插件管理器一键安装，也支持手动克隆安装，整个项目遵循MIT开源许可协议发布。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-provider-rate-limit（jyao-SUSE-power-group/dsh-provider-rate-limit）
仓库：https://github.com/jyao-SUSE-power-group/dsh-provider-rate-limit
本站详情页：https://www.yhbd.top/plugins/jyao-suse-power-group-dsh-provider-rate-limit/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 4 · 最近提交 2026-09-10 · 主语言 JavaScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意
  • Only 4 stars - very few users, little community feedback星标只有 4，几乎没人在用，遇到问题缺少社区反馈
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add github:jyao-SUSE-power-group/dsh-provider-rate-limit

把 jyao-SUSE-power-group/dsh-provider-rate-limit 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

10.3 KB · 缓存于 2026-09-05 19:42:27 · 10.3 KB

dsh-provider-rate-limit

English | 简体中文

Per-provider & per-model rate limiting for DeepSeek Harness LLM traffic, plus gateway identity rules (client spoofing) for restricted free-tier gateways.

适用于 DeepSeek Harness 的按供应商/模型粒度 LLM 限速插件，附带网关身份规则（客户端伪装）能力。

Features

  • Token-bucket rate limiting per (provider, model) route — smooth refill with burst support, idle-time recovery
  • Two modes when the bucket is empty:
    • wait — hold the request up to maxWaitMs, then let it through (transparent queueing)
    • reject — short-circuit immediately with a synthetic RATE_LIMIT response carrying providerRetryAfterMs
  • Strict FIFO — reservation-based design guarantees same-order admission without polling
  • Gateway identity rules — rewrite User-Agent / inject static headers for URLs matching a pattern (e.g. gateways that validate client identity), with a one-click OpenCode Zen preset
  • Master switch — flip enabled off to pass all traffic instantly, no listener re-registration
  • Settings UI card — full configuration from the Harness settings page, zh/en localized
  • Live stats line — compact readout in the composer dock (under the chat input), SSE-pushed in real time (no polling); hover to see per-route provider·model breakdown
  • SSE push endpoint — GET /api/provider-rate-limit.events streams a fresh stats snapshot every time counters change, with a 15 s heartbeat and automatic reconnection
  • Stats HTTP API — GET /api/provider-rate-limit.stats returns aggregate and per-route counters as JSON (used by the dock line; also available for external tooling)
  • Cross-plugin stats service — provider-rate-limit/stats service for in-process consumers (getStats, getAllStats, getAggregateStats, resetStats)
  • O(1) route lookup — pre-built Map for rule matching instead of linear scan
  • Standard ULID — 26-char Crockford base-32 IDs (48-bit big-endian time + 80-bit random)

Install

DSH plugin manager (recommended)

dsh plugin --profile web add github:jyao-SUSE-power-group/dsh-provider-rate-limit

Then restart DeepSeek Harness. The plugin registers itself into the llm service via its cordis patch.

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 jyao-SUSE-power-group/dsh-provider-rate-limit 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev dsh-tool-diff 下一个 Next dsh-ppt-studio →