rayadesune/DeepSeek-Harness-chat-billing
类原生计费插件
Project Overview项目介绍
A DeepSeek Harness plugin that surfaces the DeepSeek account balance, this session's billed spend, and today's total spend in the session header, with a static turn-cost amount at the end of each completed message's actions row and a today session-spend ranking in the detail panel. Session and today spends price tokens at official peak/off-peak Beijing-time rates and recompute locally on log changes; balance is queried only on mount, session switch, manual refresh, or browser reload, with no polling. Only models with a configured rate row are priced, interrupted turns show nothing, and all figures are estimates, not billing promises.
DSH 计费插件,实时显示 DeepSeek 账户余额、本轮会话花费与今日累计花费,每轮消息末尾静态显示该轮费用,详情面板含分模型计费明细与今日会话花费排行。会话/今日花费按北京时峰谷规则本地估算(仅在消息新增或日志变更时增量计算),余额仅在挂载、切换、手动刷新或刷新页面时拉取,不轮询。可用模型限于内置 V4 行表(V4 Flash、V4 Pro、V4 Flash Vision Exp),未配置行不参与计费;中断轮次无费用显示,所有数值为估算,最终以官方账单为准。
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】,检查通过再动手。
插件:DeepSeek-Harness-chat-billing(rayadesune/DeepSeek-Harness-chat-billing)
仓库:https://github.com/rayadesune/DeepSeek-Harness-chat-billing
本站详情页:https://www.yhbd.top/plugins/rayadesune-deepseek-harness-chat-billing/
本站登记:类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 3 · 最近提交 2026-09-29 · 主语言 TypeScript
按下面顺序执行,每步先把结论告诉我,再进入下一步:
【1 兼容性检查】
① 我这边:DSH 版本、Node 版本、操作系统、当前 profile(web / desktop)。
② 读它的 README、package.json、插件 manifest,列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对,结论只写「满足 / 不满足 / 未知」三种;不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突:命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。
【2 安全性检查】
① 仓库可信度:和上面「本站登记」是否一致;star / fork 数、创建时间、最近提交,是否归档或长期停更。
② 安装脚本:逐行看 package.json 的 preinstall / install / postinstall,以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名,立刻停下来告诉我,不要继续装。
③ 依赖:列出新增依赖,标出无人维护、或与知名包拼写近似的可疑包(typosquatting)。
④ 权限与副作用:它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限(filesystem / network / shell / clipboard 等),以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限,或权限明显超出功能所需,先停下来问我。
【3 安装】
上面两步没有「不满足」和「高危项」时才执行;用官方推荐方式安装,不要自行提权。
【4 汇报】
用表格输出:检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜,也不要替我决定。
Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH:它会先核对兼容性与安全性(逐条给「满足 / 不满足 / 未知」),确认没问题再安装,有高危项会停下来问你。框内可滚动,复制到的是完整提示词;安装命令不一定准确,发给 DSH 更稳。
- Only 3 stars - very few users, little community feedback星标只有 3,几乎没人在用,遇到问题缺少社区反馈
DSH walks through these 9 checksDSH 会逐条核对这 9 项
Compatibility兼容性
- DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
- External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时(Electron / Python / Docker 等)是否齐备
- Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突:命令名、skill / tool 重名、端口占用、重复 MCP 注册
Security安全性
- Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致,是否归档或长期停更
- Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
- curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
- Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
- Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需(filesystem / network / shell / clipboard)
- Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限,以及卸载与回滚方式
Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照,不能替代安全审计。
Or use CLI install (for developers)或使用命令行安装(适合开发者)
CLI Install命令行安装
dsh plugin --profile web add @rayadesu/dsh-billing
把 rayadesune/DeepSeek-Harness-chat-billing 加入你的 DSH 配置(web profile)即可启用。
READMEREADME
DeepSeek Harness billing plugin
English | 中文
A DeepSeek Harness plugin that shows your DeepSeek account balance and today's total spend across all sessions directly in the web session header, and this conversation's own billed spend on a pill under the composer; each completed turn also shows its turn cost as a static amount at the end of the message actions row, and the detail panel ends with a today session-spend ranking.
The balance is the real
GET /user/balancefigure; the session, turn, and today spends price each message's billed tokens at the official peak/off-peak rates and are estimates, not billing promises.
What it shows
- Session-header badge — two lines: remaining balance (
剩余金额:¥X, the panel's headline without itsAPIprefix — the chip is narrow) and today's spend across every session (今日花费:¥X, worded exactly as the panel labels it — the chip's second line and the panel's row read the same state, so they cannot disagree). Being account-level, it moves on the day's own reads (mount, refresh, a settled turn, and a panel open) rather than streaming with the turn. - Detail panel — the remaining amount with today's consumption measured from the balance series after it (see How session spend is computed); today's billed token count next to today's all-session spend (
今日 Token/今日花费, one row; the count is DSH's compact notation with its own unit —12.2K tok, followed by the day's cache-hit share as a bare, unparenthesized percentage, rendered by DSH's own hit-rate rule: an integer percent that grows decimals only as far as a partial hit needs to stay below 100, and none at all when the day billed no prompt-side input); directly under that row, today's two bucket detail lines — tokens on top, costs below, each on its own with its natural·spacing (no column alignment between them), in the per-model breakdown line's typography but on the third section's row spacing (the today session-spend ranking's tight 6px rhythm); every spend amount renders at three significant digits (¥9.58) but never finer than four decimals — an amount below ¥0.0001 reads¥0— while the balance line alone keeps four decimals; and a manual refresh action and a spend disclaimer on the?button (one line of estimate scope, then a line stating that a conversation's amount includes the subagent sessions it delegated, and the running plugin version as the last line, e.g.v0.3.13). The panel ends with a today session-spend ranking: sessions sorted by today's spend, highest first — one row per conversation, since each subagent session's spend is merged into the row of the session that delegated it (names come from the log's Chinese titles and follow renames automatically; at most the top 10 rows, with a "…N more sessions" hint). - Turn cost amount — each completed turn's closing message shows a plain static
¥Xat the end of the actions row, after the clock: non-interactive (no icon, no "cost" word, no card), its typography replicates the clock text (13px secondary tier, tertiary tone, nowrap), and it is always visible (not hover-revealed like the clock text — the row's own hover reveal shows both together); turns without DeepSeek usage (zero cost) or failed loads stay hidden. - Composer spend pill — the composer's own stat row (the one DSH's time/token pills sit in) carries one more entry: this plugin's ring-and-sparkle mark plus this conversation's billed spend, at the same three-significant-digit precision as the badge, opening a cost card whose three rows are the spend's three billing buckets (uncached input / cached input / output) under DSH's own token-card wording. Its amount is the conversation's — this session plus the subagent sessions it delegated, merged by the same rule the host's own sums use; it is the ONLY surface that shows the conversation's own spend (the badge's second line and its panel report the day), so a session that priced nothing anywhere shows no pill, while one that priced nothing itself but delegated a priced subagent still shows.
- Failures and empty states — a session or day without priced usage shows "no usage recorded" instead of a fabricated figure; a missing key, rejected credential, or transport error renders a muted "Balance unavailable" chip, and an API key the API reports without any spendable balance renders the ordinary chip with a
—amount. Both open the detail panel, whose first row explains the—in one short localized sentence (check the API key, or that the key holds no balance — the Remote's verbatim English message is not rendered) and which keeps the refresh action; today's spend is read from the session logs, so it stays on the chip and in the panel either way.
Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要,完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →
MeteorNOX/DeepSeek-Balance-Whale-Widget
edison7009/EchoBird
Han-1413141/dsh-cost-meter
wssfk12138/dsh-damage-pulse
zh667/TokenLedger
edonadei/caliper
Ychris12138/dsh-usage-stats
Aisland-SJL/dsh-usage