SiriLee/dsh-edit-approval

Name: SiriLee/dsh-edit-approval
Author: SiriLee

Plugin插件 Native原生 ⭐ 3 MIT Approval & Security审批与安全 Dev Workflow开发与代码工作流

DeepSeek Harness 插件：在写入/编辑/str_replace_editor 操作前，以红/绿行差异方式逐次审批（批准 / 拒绝 / 始终允许）

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is a native plugin built exclusively for DeepSeek Harness (DSH), adding two mandatory approval gates for core agent actions: one intercepts all file modification calls, and the other intercepts all bash command execution. It requires explicit manual approval from the user before any intercepted action can proceed to run. Once installed, it adds two independent toggle controls to DSH’s Settings → General page, letting users turn each approval gate on or off whenever they need. The standard installation command is dsh plugin --profile web add dsh-edit-approval, and users must restart the dsh web process to activate the plugin after the install completes.

When the agent calls any write-family tool like write, edit, or str_replace_editor to modify a file, the plugin triggers an in-app approval panel that shows a line-level red-green diff of the proposed changes. Users can choose to either approve the operation once or reject it entirely. Bash command approval is disabled by default, but once enabled, every command the agent wants to run will appear in the panel with its description and raw text, also requiring explicit user approval. Users can also toggle the on/off status of each approval gate directly via the built-in slash commands /approval-edit and /approval-bash.

This plugin is released under the open-source MIT license, and it does not make any outbound network requests or access user credentials stored in DSH. It only reads target files to generate accurate edit previews, and never performs any file writes on its own, as all writes are handled by the original tool only after user approval. There is currently no user interface for configuring the bash command allowlist that auto-approves matching commands, so this configuration can only be done manually in the plugin’s config file. Both DSH and this plugin are in developer preview, so users are advised to pin exact versions for stable, production use.

这是一个专为 DeepSeek Harness (DSH) 开发的原生审批插件，为代理的文件写入编辑和 bash 命令执行添加了两道前置审批门，要求任何操作执行前都必须经过用户手动确认。安装后，DSH 的「设置→通用」页面会新增两个开关，可分别启用或关闭编辑审批、命令审批功能。用户可通过 DSH 内置插件命令 dsh plugin --profile web add dsh-edit-approval 完成安装，之后重启 dsh web 即可激活插件。

当代理触发写入、编辑或调用str_replace_editor工具修改文件时，插件会弹出审批面板，面板内显示修改内容的红绿行级差异对比，用户可以选择一次性批准操作或直接拒绝。默认关闭的bash命令审批开启后，每次代理执行bash命令前也会弹出面板，显示操作描述和原始命令文本等待用户确认。用户也可以通过/approval-edit和/approval-bash这类斜杠命令切换两个审批门的开关状态。

本插件采用 MIT 许可证开源，不会发起网络请求，也不会访问用户凭据，仅在生成编辑预览时读取目标文件，本身不会执行任何文件写入操作。目前它还未提供可配置bash命令白名单绕过规则的UI界面，用户只能在配置文件手动添加允许放行的命令前缀。插件和 DSH 目前都处于开发者预览阶段，建议在可复现环境中固定使用确切版本。

View on GitHub在 GitHub 查看

Send to your DSH发给你的 DSH 安装

请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-edit-approval（SiriLee/dsh-edit-approval）
仓库：https://github.com/SiriLee/dsh-edit-approval
本站详情页：https://www.yhbd.top/plugins/sirilee-dsh-edit-approval/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 3 · 最近提交 2026-09-28 · 主语言 TypeScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意

Only 3 stars - very few users, little community feedback星标只有 3，几乎没人在用，遇到问题缺少社区反馈

DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装

dsh plugin --profile web add dsh-edit-approval

把 SiriLee/dsh-edit-approval 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

15.5 KB · 缓存于 2026-09-29 05:52:24 · 15.5 KB

dsh-edit-approval

Ask-before-act approval for DeepSeek Harness: every write / edit call asks before the file is touched — a red/green line-level diff, approve once or reject — and every bash command asks before it runs, each with its own master switch on the plugin's own page under Plugins in the sidebar.

English | 中文

A deliberately focused plugin with two mirror-symmetric approval gates — edits and commands — so the agent can never modify files or run commands without your say-so.

Gate	Intercepts	Default	Panel
Edit approval	`write` / `edit` (`str_replace_editor` on request)	On	Red/green line-level diff — approve once or reject
Bash approval	`bash`	Off	Description headline + native command row

Both gates ride the harness's own serviceAsk seam: the plugin returns { kind: 'ask', reason } from tools/pre-execute, the harness routes it into the web approval panel — zero UI changes in the host — allowed-once proceeds, rejected denies the call, and under the never policy the plugin delegates so full-access sessions keep working.

Preview

Every write-family call shows the red/green diff panel; after you enable command approval, every command shows a panel whose white headline is the agent's description and whose grey row is the raw command text. Both master switches live on this bundle's page in the sidebar's Plugins panel, staged through the harness's own form (captured on v0.4.0).

_{Edit approval panel — red/green line diff}	_{Bash approval panel — description + command}
_{Master switches on the bundle's page in the sidebar's Plugins panel}	_{/approval-edit and /approval-bash commands}

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 SiriLee/dsh-edit-approval 的 README.md。在 GitHub 查看原文 →