DSH Plugin HubDSH 插件市场
SiriusNEO/StarAgent 预览 preview

SiriusNEO/StarAgent

Plugin插件 ⭐ 60 MIT Models & Routing模型与路由

StarAgent is a local-first Agent Harness Launcher and an optional multi-Node Hub for managing coding agent sessions. It reflects my own best practices for using multiple agents:

catalog descriptioncatalog 简介 / catalog description：Lightweight agent multiplexer, all in one Web dashboard

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

StarAgent is an agent multiplexer that unifies management of coding agent sessions across multiple machines via a centralized web dashboard. It works with multiple coding agent CLIs including Claude Code, Codex, OpenCode, and DSH. To set up a deployment, users first install the tool via pip from the source repository, then run staragent hub on the machine that will host the dashboard. Remote machines that will run agent sessions get a Node deployment, connected via Tailscale for cross-machine secure access or directly over a local area network. Any device with a web browser can access the dashboard without extra software installed.

This tool is built for developers who regularly run multiple coding agent tasks across different working directories and want a single place to manage all of them. All agent sessions run inside long-lived tmux sessions, so users do not need to manually resume sessions every time they reconnect after a restart or disconnect. Users can check the status of all running agents at a glance, interact directly with agents via the web dashboard, or manually SSH into any remote machine to debug sessions if needed. The dashboard works on mobile and desktop devices, so you can manage agents from anywhere with an internet connection.

StarAgent is released under the open source MIT license, but it is currently under active development and intended only for personal use, with no stable version released yet. The project notes that it was built primarily with vibe coding, so potential bugs may exist that users should watch out for. To run cross-machine connections via Tailscale, users must have Tailscale installed and configured beforehand, and some setups may require sudo privileges for Tailscale serve. After installation, users must verify remote nodes from the hub before adding them to the dashboard. Custom themes and backgrounds can be configured to match user preferences.

StarAgent 是一个代理多路复用工具，可统一管理跨多台机器的编码代理会话，通过中心化 Web 仪表板让用户在任意设备上查看、控制所有代理会话。它支持 Claude Code、Codex、DSH 等多种编码代理 CLI，采用中心 Hub 加远程 Node 架构，通过 Tailscale 实现跨机器安全连接，也支持纯局域网部署。用户可通过任意带浏览器的设备访问仪表板，无需额外安装软件。

适合需要同时运行多个编码代理任务、分散在不同工作目录又希望统一管理的开发者。用户可在 Hub 节点启动仪表板，在每台需要运行代理的机器上部署远程 Node，所有会话都运行在持久化的 tmux 会话中，无需每次重启后手动恢复会话。用户可随时查看所有代理的运行状态，在网页端直接和代理交互，也能手动 SSH 连接到机器调试。

项目目前处于活跃开发阶段，仅供个人使用，暂未发布稳定版本，基于 MIT 许可证开源。部署需要 Python 环境，通过 pip 安装后即可启动，跨机器连接需要提前配置好 Tailscale，部分场景需要 root 权限运行 Tailscale。项目提示可能存在潜在 Bug，使用前需要留意这一点。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：StarAgent（SiriusNEO/StarAgent）
仓库：https://github.com/SiriusNEO/StarAgent
本站详情页：https://www.yhbd.top/plugins/siriusneo-staragent/
本站登记：类型 plugin · 归类 多平台兼容工具（非 DSH 原生） · 许可证 MIT · ⭐ 60 · 最近提交 2026-10-01 · 主语言 Python · 未检测到 DSH 插件清单

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意
  • No DSH plugin manifest detected - it may only carry the dsh-plugin topic, so the install method must be confirmed on the spot未检测到 DSH 插件清单：可能只是打了 dsh-plugin 话题，安装方式要现场确认
  • Not DSH-native: a multi-platform tool that may require Node / Electron or another runtime first非 DSH 原生，是多平台兼容工具：可能要先装 Node / Electron 等运行时
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add github:SiriusNEO/StarAgent

把 SiriusNEO/StarAgent 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

9.6 KB · 缓存于 2026-10-01 22:09:43 · 9.6 KB

StarAgent

StarAgent logo

简体中文

⚠️ This project is currently intended for personal use and is under active development. A stable version will be released later.

⚠️ This project was primarily built with vibe coding and may contain potential bugs. Please keep this in mind before using it.

StarAgent is a local-first Agent Harness Launcher and an optional multi-Node Hub for managing coding agent sessions. It reflects my own best practices for using multiple agents:

We need a lightweight persistent terminal wrapper for Codex / Claude Code that supports cross-machine connections and can be accessed from any device.

Design Principles

It is built around a few practical needs that show up when using coding agents day to day:

  • We often run multiple agent CLI instances in parallel across different working directories, each handling a separate task. We need one place to check their status and interact with them in real time.
  • We want to interact with our agents anywhere, anytime, and on any device. And the sessions should be consistent.
  • Agent CLI sessions should be long-lived, so we do not need to keep typing /resume.

Based on hands-on experience, StarAgent uses the simplest effective stack for this workflow, making it feel like managing a small team of coding agents:

  • Platform-native persistent terminals. Windows Desktop hosts sessions with ConPTY; Linux, macOS, and server Nodes use long-lived tmux sessions. See SESSIONS.md for the session model.

  • Cross-machine connectivity via Tailscale. Tailscale provides a secure and unified network layer across machines. See tailscale/README.md for the Tailscale setup.

  • Unified management through a web dashboard. The web dashboard lets you control agents from any device with a browser, including phones and laptops, without installing extra software.

  • Node-local account and launch control. Sign in or switch credential sources from the Harness page, browse the models exposed by each CLI, and choose model plus reasoning-effort defaults for new Sessions without rewriting vendor configuration files.

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 SiriusNEO/StarAgent 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev dsh-openbiliclaw 下一个 Next dsh-connect-workbuddy →