DSH Plugin HubDSH 插件市场

TingRuDeng/dsh-smart-approval

Plugin插件 Native原生 ⭐ 2 MIT Approval & Security审批与安全Prompts & Skills提示词与技能

DeepSeek Harness 的故障关闭三模式审批插件

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

dsh-smart-approval is a fail-closed approval security plugin built exclusively for DeepSeek Harness (DSH). It adds an independent automatic review selector alongside DSH's native access permission controls, separating permission configuration from the approval workflow. The plugin offers three review modes: manual, smart, and unattended, each with tailored rules for handling low-risk, high-risk, and clearly malicious requests. To install the plugin, you need Node.js 24 or later, a DSH version between 0.1.2-alpha.1 and 0.2.0, and pnpm available in your system PATH. You can install it via a globally installed DSH CLI or use npx for a one-off execution.

By default, all new DSH sessions use smart approval mode, which is the recommended setting. Changes to review mode or access permission do not require restarting DSH, and any adjustments take effect on the next approval request without disrupting your current session. You can switch modes via the web interface selector or use the /approval-mode command directly in your active session. The /approval-log command lets you view a log of automatic approval decisions for your current session, with configurable size to disable auditing if needed. This plugin is designed for developers who need layered security controls for their DSH workflows.

Both this plugin and DSH are currently in developer preview, so there are still known security limitations. For example, the plugin cannot fully eliminate path-replacement race conditions on workspace write operations, and it does not turn the single DSH workspace root into a multi-root sandbox. You should always pin exact versions of the plugin and DSH to ensure a reproducible environment. The plugin is released under the open-source MIT license, which allows free use, modification, and distribution. For local development, you need to match your DSH checkout version to the supported baseline to resolve dependencies correctly.

dsh-smart-approval是专为DeepSeek Harness（DSH）开发的原生故障关闭型安全审批插件，它在DSH原生提供的只读、工作区写入、完全访问三种权限控制基础上，额外增加了独立的自动审批选择器，将访问权限配置与自动审批流程分离，新增智能、手动、无人值守三种审批模式，可针对不同风险等级的操作匹配对应审批规则。

默认情况下，所有新会话都会启用智能审批模式，修改审批模式或访问权限都无需重启DSH，变更会在下一次审批请求中生效。用户可以在网页端通过独立选择器切换模式，也可以在会话中使用/approval-mode命令切换，还能通过/approval-log命令查看本次会话的自动审批决策日志。该插件面向需要对DSH操作做分层安全管控的开发人员，适配不同风险级别的开发安全场景。

安装该插件需要Node.js 24及以上版本、DSH版本需在0.1.2-alpha.1到0.2.0之间，还需要pnpm添加到系统环境变量PATH中。目前插件和DSH都处于开发者预览版，无法完全消除路径替换竞争等安全问题，使用时需要锁定精确版本以保证运行环境可重现。该插件采用MIT开源许可协议，可免费使用、修改和分发。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-smart-approval（TingRuDeng/dsh-smart-approval）
仓库：https://github.com/TingRuDeng/dsh-smart-approval
本站详情页：https://www.yhbd.top/plugins/tingrudeng-dsh-smart-approval/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 2 · 最近提交 2026-08-31 · 主语言 TypeScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意
  • Only 2 stars - very few users, little community feedback星标只有 2，几乎没人在用，遇到问题缺少社区反馈
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add dsh-smart-approval@0.1.0-rc.11

把 TingRuDeng/dsh-smart-approval 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

14.1 KB · 缓存于 2026-09-01 05:16:12 · 14.1 KB

dsh-smart-approval

English | 中文 | Changelog

dsh-smart-approval is a fail-closed approval plugin for DeepSeek Harness. It separates access permission from automatic review: DSH continues to own Read Only, Workspace Write, and Full access, while this plugin adds an independent review selector beside Workspace Write.

New sessions use smart approval by default. Changing review mode does not change the sandbox, and changing access permission does not change review mode. Both changes apply to the next approval request without restarting DSH.

[!WARNING] This project and DSH are both in developer preview. Review the security boundaries below and pin exact versions in reproducible environments.

Two independent selectors

The Web composer should show two controls:

[ Workspace Write ▾ ] [ Smart approval ▾ ]
  • Access: Read Only, Workspace Write, and Full access, owned by DSH.
  • Automatic review: Manual approval, Smart approval, and Unattended, owned by this plugin.
Review mode Safe request High-risk or uncertain Clearly malicious
Manual approval Ask a human Ask a human Ask a human
Smart approval (recommended default) Allow once Ask a human Reject
Unattended Allow once Reject Reject

Automatic review only handles requests that already enter DSH's approval/request waterfall. It never expands the current access permission or switches a session to Full access.

Install

Requirements

  • Node.js 24 or later.
  • DeepSeek Harness >=0.1.2-alpha.1 <0.2.0 (current source verification baseline: 0.1.2-alpha.2, commit 0a53fb55bea101816fa226bb964ae2bed71c343b).
  • pnpm on PATH; DSH forwards plugin-management operations to pnpm.

After installing the DSH CLI globally:

npm install --global @deepseek-ai/dsh@0.1.2-alpha.2
dsh plugin --profile web add dsh-smart-approval@0.1.0-rc.11
dsh --profile web --dump-config
dsh web

For one-off execution:

npx @deepseek-ai/dsh@0.1.2-alpha.2 plugin --profile web add dsh-smart-approval@0.1.0-rc.11
npx @deepseek-ai/dsh@0.1.2-alpha.2 --profile web --dump-config
npx @deepseek-ai/dsh@0.1.2-alpha.2 web

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 TingRuDeng/dsh-smart-approval 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev dsh-hotspots 下一个 Next dsh-mcp-workspace-scope →