DSH Plugin HubDSH 插件市场
BeiZi6/dsh-opencodego-usage 预览 preview

BeiZi6/dsh-opencodego-usage

Plugin插件 Native原生 ⭐ 7 MIT Usage & Cost用量与计费Models & Routing模型与路由

DSH Web GUI插件：OpenCodeGo配额呼吸灯 + 液态玻璃面板，带滚动/每周/每月进度条（作者：徐远山）

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is a native plugin built exclusively for the DeepSeek Harness (DSH) Web GUI, designed to monitor OpenCodeGo API usage quota. It adds a breathing, color-coded indicator with a gentle 3.6 second breathing animation to the bottom right of the DSH conversation input box, so users can see their remaining quota at a glance. The indicator’s color changes based on the lowest remaining percentage across three quota windows: it shows green when remaining quota is over 50%, yellow for 20% to 50%, and red when it drops below 20%.

Clicking the indicator opens a liquid-glass style panel with mouse-follow highlight effects and frosted blur. The panel displays used percentage, remaining amount, and exact reset time for each of the three quota windows: rolling (roughly the last 5 hours), weekly (last 7 days), and monthly (last 30 days). Data automatically refreshes every two minutes to pull the latest quota numbers from OpenCodeGo’s official API, and users can manually override their OpenCodeGo API key directly within the panel if needed. It is intended for DSH users who use OpenCodeGo as their LLM provider, letting them track quota without leaving the DSH interface.

To install the plugin, run dsh plugin --profile web add github:BeiZi6/dsh-opencodego-usage then restart the dsh web process for it to take effect. It requires Node.js version 22.19 or newer, and has peer dependencies on @deepseek-ai/cordis version ^4 and @deepseek-ai/dsh-host-webserver version ^0.1.0-rc.6. The plugin automatically pulls your API key from DSH credentials when you use the opencode-go provider, any manually overridden key is stored locally in a DSH home directory state file, and the full project is released under the open-source MIT license.

这是专为 DeepSeek Harness (DSH) Web GUI 开发的原生插件，用于监控 OpenCodeGo API 的剩余使用额度。它会在对话输入框右下角添加一个带呼吸动画的颜色指示器，剩余额度一目了然，颜色根据三个额度窗口中最低剩余百分比变化：超过 50% 显示绿色，20% 到 50% 显示黄色，低于 20% 显示红色。

点击指示器会展开一个带鼠标跟随高亮和毛玻璃效果的液态玻璃面板，面板内展示滚动（约近5小时）、周（约近7天）、月（约近30天）三个额度窗口的已用占比、剩余额度和各自的重置时间。数据每两分钟自动刷新获取最新额度，也支持手动在面板内覆盖输入 OpenCodeGo API 密钥，适合使用 OpenCodeGo 服务商模型的 DSH 用户随时掌握配额状态。

该插件需要 DSH 开启 web 配置文件，依赖 Node.js 22.19 及以上版本，以及 @deepseek-ai/cordis ^4 和 @deepseek-ai/dsh-host-webserver ^0.1.0-rc.6 作为对等依赖。可通过 DSH 官方指令安装，重启 dsh web 后生效。手动覆盖的密钥仅存储在本地状态文件，不会外传，项目采用 MIT 开源许可。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-opencodego-usage（BeiZi6/dsh-opencodego-usage）
仓库：https://github.com/BeiZi6/dsh-opencodego-usage
本站详情页：https://www.yhbd.top/plugins/beizi6-dsh-opencodego-usage/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 7 · 最近提交 2026-08-14 · 主语言 JavaScript

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 1 warning1 项注意
  • Only 7 stars - very few users, little community feedback星标只有 7，几乎没人在用，遇到问题缺少社区反馈
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add github:BeiZi6/dsh-opencodego-usage

把 BeiZi6/dsh-opencodego-usage 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

4.2 KB · 缓存于 2026-08-23 03:41:27 · 4.2 KB

dsh-opencodego-usage

English · 简体中文

OpenCodeGo quota monitor for the DeepSeek Harness (DSH) Web GUI: a breathing indicator at the bottom-right of the input box shows your remaining quota at a glance; click it to open a liquid-glass panel with per-window progress bars and reset times.

Features

  • 🟢🟡🔴 Breathing indicator — color-coded by remaining quota (>50% green, 20–50% yellow, <20% red) with a gentle 3.6 s breathing animation
  • 📊 Three-window progress panel — rolling (≈ last 5 h), weekly (≈ last 7 d) and monthly (≈ last 30 d) bars with used · remaining amounts and a reset time for each window
  • 🔑 Zero-config key handling — reads your API key from DSH credentials automatically (only when the provider is opencode-go); an in-panel override is available
  • 🪟 Liquid-glass panel — mouse-follow highlight, frosted blur and a window-style diagonal open animation
  • ⏱ Auto-refresh — fetches fresh quota every 2 minutes

Installation

Requires DeepSeek Harness with the web profile enabled. Install from the official registry:

dsh plugin --profile web add github:BeiZi6/dsh-opencodego-usage

Restart dsh web for the plugin to take effect.

To remove:

dsh plugin --profile web remove dsh-opencodego-usage

Usage

  • The indicator sits at the bottom-right of the conversation input; its color reflects the lowest remaining share across the three windows:

    Remaining share Color
    > 50% 🟢 green
    20–50% 🟡 yellow
    < 20% 🔴 red

  • Click it to expand the panel:

    • rolling — quota used in roughly the last 5 hours
    • weekly — quota used in roughly the last 7 days
    • monthly — quota used in roughly the last 30 days

  • Each window shows the used percentage, the remaining share and the exact reset time.

  • A manual API key override can be entered in the panel for the current session; clearing it falls back to automatic resolution.

  • Data refreshes automatically every 2 minutes.

API key resolution

The plugin looks for a key in this order:

  1. Manual override entered in the panel (kept in a small state file under $DSH_HOME; the path can be moved with the OCG_STATE_PATH environment variable)
  2. DSH credentials — only when the active provider is opencode-go, the credential referenced by llm-pi-ai.providers.opencode-go.apiKeyEnv is resolved
  3. Process environment
  4. The state file

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 BeiZi6/dsh-opencodego-usage 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev deepseek-aix 下一个 Next dsh-web-search-multi →