DSH Plugin HubDSH 插件市场

shayexiangpaimeng/dsh-memory

Plugin插件 ⭐ 2 MIT Memory & Knowledge记忆与知识库Sessions & Context会话与上下文

Append-only layered memory plugin for DeepSeek Harness: five-layer partitioning, write gate, keyword recall, claim-anchors verification

Project Overview项目介绍

Edited by Zhiwei Agent (zhiwei)由知微Agent(zhiwei)编辑

This is a community plugin for DeepSeek Harness that provides append-only five-layer partitioned durable memory for agents. It supports write validation, keyword recall and claim-anchor verification. Use it when you need long-term traceable agent memory. It currently only supports keyword-based recall, not vector search.

这是DeepSeek Harness代理的追加式分层持久记忆插件，支持五层分区存储、写入校验、关键词召回和声明锚点验证，需要为代理保留长期可追溯记忆时使用，注意当前仅支持关键词召回，不支持向量搜索。

View on GitHub在 GitHub 查看

Recommended强烈推荐 Send to your DSH发给你的 DSH 安装 
请帮我安装这个 DSH 插件。安装前先完成【兼容性检查 + 安全性检查】，检查通过再动手。

插件：dsh-memory（shayexiangpaimeng/dsh-memory）
仓库：https://github.com/shayexiangpaimeng/dsh-memory
本站详情页：https://www.yhbd.top/plugins/shayexiangpaimeng-dsh-memory/
本站登记：类型 plugin · 归类 原生 DSH 插件 · 许可证 MIT · ⭐ 2 · 最近提交 2026-09-24 · 主语言 TypeScript · 未检测到 DSH 插件清单

按下面顺序执行，每步先把结论告诉我，再进入下一步：

【1 兼容性检查】
① 我这边：DSH 版本、Node 版本、操作系统、当前 profile（web / desktop）。
② 读它的 README、package.json、插件 manifest，列出它要求的 DSH 版本 / Node 版本 / 操作系统 / 外部依赖 / 需要另外先装的运行时。
③ 逐条比对，结论只写「满足 / 不满足 / 未知」三种；不满足的给出可行替代方案。
④ 检查是否和我已装的插件冲突：命令名重复、skill / tool 重名、端口占用、重复注册的 MCP server。

【2 安全性检查】
① 仓库可信度：和上面「本站登记」是否一致；star / fork 数、创建时间、最近提交，是否归档或长期停更。
② 安装脚本：逐行看 package.json 的 preinstall / install / postinstall，以及 install.sh、setup.ps1 之类脚本。出现 curl|bash、下载后直接执行、混淆代码、访问与插件功能无关的域名，立刻停下来告诉我，不要继续装。
③ 依赖：列出新增依赖，标出无人维护、或与知名包拼写近似的可疑包（typosquatting）。
④ 权限与副作用：它会读写哪些目录、访问哪些域名、需要哪些 DSH 权限（filesystem / network / shell / clipboard 等），以及怎么卸载和回滚。
⑤ 如果它要求 sudo / 管理员权限，或权限明显超出功能所需，先停下来问我。

【3 安装】
上面两步没有「不满足」和「高危项」时才执行；用官方推荐方式安装，不要自行提权。

【4 汇报】
用表格输出：检查项 / 结论 / 依据 / 是否需要我决策。拿不准的一律写「未知」并说明要我怎么确认——不要猜，也不要替我决定。

Send this message to DSH in your current session: it verifies compatibility and security first (answering met / not met / unknown item by item) and only installs once everything checks out — it will stop and ask you if it finds a high-risk item. The box scrolls; the copy is the full prompt. CLI install commands may not be accurate across systems, so DSH is the safer route.把上面这条消息直接发给当前会话里的 DSH：它会先核对兼容性与安全性（逐条给「满足 / 不满足 / 未知」），确认没问题再安装，有高危项会停下来问你。框内可滚动，复制到的是完整提示词；安装命令不一定准确，发给 DSH 更稳。

Pre-install check安装前体检Compatibility · Security兼容性 · 安全性 2 warnings2 项注意
  • Only 2 stars - very few users, little community feedback星标只有 2，几乎没人在用，遇到问题缺少社区反馈
  • No DSH plugin manifest detected - it may only carry the dsh-plugin topic, so the install method must be confirmed on the spot未检测到 DSH 插件清单：可能只是打了 dsh-plugin 话题，安装方式要现场确认
DSH walks through these 9 checksDSH 会逐条核对这 9 项

Compatibility兼容性

  • DSH, Node, OS and profile requirementsDSH 版本 / Node 版本 / 操作系统 / profile 是否满足要求
  • External dependencies and runtimes (Electron / Python / Docker, ...)外部依赖与运行时（Electron / Python / Docker 等）是否齐备
  • Conflicts with installed plugins: command names, skill / tool names, ports, duplicate MCP registration与已装插件是否冲突：命令名、skill / tool 重名、端口占用、重复 MCP 注册

Security安全性

  • Repo matches the facts registered here; archived or abandoned?仓库是否与页面登记一致，是否归档或长期停更
  • Safety of preinstall / install / postinstall and install.sh / setup.ps1preinstall / install / postinstall 与 install.sh、setup.ps1 是否安全
  • curl|bash, download-then-execute, obfuscation, unrelated domains → stop immediatelycurl|bash、下载即执行、混淆代码、无关域名 → 立刻停止
  • Typosquatting or unmaintained packages among the new dependencies新增依赖里有没有 typosquatting 或无人维护的包
  • Requested permissions vs. what the feature actually needs申请了哪些权限、是否超出功能所需（filesystem / network / shell / clipboard）
  • Any sudo / admin requirement, plus uninstall and rollback是否要求 sudo / 管理员权限，以及卸载与回滚方式

Anything uncertain must be marked unknown with a note on how to confirm it. This site's signal screen is a static snapshot, not a security audit.拿不准的必须标「未知」并说明要我怎么确认。本站的信号筛查是静态快照，不能替代安全审计。

Or use CLI install (for developers)或使用命令行安装（适合开发者）

CLI Install命令行安装 

dsh plugin --profile web add github:shayexiangpaimeng/dsh-memory

把 shayexiangpaimeng/dsh-memory 加入你的 DSH 配置（web profile）即可启用。

READMEREADME

5.1 KB · 缓存于 2026-09-24 22:11:55 · 5.1 KB

@shayexiangpaimeng/dsh-memory

Append-only layered memory for DeepSeek Harness agents.

上下文会缩，记忆不该缩。

A community plugin (dsh-plugin) that gives an agent a durable, append-only memory stream with five-layer partitioning, a write gate, keyword recall, time-axis reads, and claim-anchors verification. Built by a deep user of DeepSeek Harness, as a generalized, privacy-free re-implementation of the memory system that has kept a companion AI continuous since the memory system was first built (August 2026).

What it does

  • Append-only write stream — every append writes one JSONL line; history is never rewritten.
  • Five-layer partitioning — permanent (never forget) / session (this session) / rolling (recent context) / config (configuration) / ephemeral (not saved).
  • Write gate — empty events, unknown layers, unknown statuses and orphan supersedes pointers are rejected or flagged before they can rot the stream.
  • Claim-anchors verification — a fix claim ("已修复…") without an anchor (measured value / checksum / command output) is flagged as a warning: claim detached from the disk = diagnosed defect, not a slip.
  • Whole-stream anchor audit (memory_audit) — write-time warnings are a soft constraint, because a claim can be rephrased as a plain statement. The audit reads the file, so it cannot be talked around.
  • Time-axis read (memory_recent) — newest first, with an optional time window and keyword filter. Keyword recall cannot answer "what is the latest" or "how long has this been untouched": those words never appear in the entries.
  • Retirement and replacement chain — retract a conclusion without rewriting it: append a new entry with supersedes: <old ts>, optionally mark the old one status: retired. Retired entries stay in the stream for audit but are filtered out of the injected summary, so a withdrawn claim cannot come back as a current fact.
  • Prompt state rendering — a dynamic memory:state section renders the recent permanent + session layers at each assembly, from a cache warmed once at startup (read-once-per-session holds after warm-up).
  • Keyword recall — case-insensitive substring scoring, newest first.

Showing the opening section of the README — the full document lives in the repository以上为 README 开头摘要，完整文档在仓库内 · View the full README on GitHub →在 GitHub 查看完整 README →

渲染基于仓库 shayexiangpaimeng/dsh-memory 的 README.md。 在 GitHub 查看原文 →

Related相关推荐

← 上一个 Prev agent-switch 下一个 Next dsh-font-enhancer →